Chemical engineers contribute to society by helping to manage resources, protecting the environment and controlling health and safety procedures. If you have an aptitude and fascination for how the physical world works, are interested in how chemical reactions and the physical properties of matter can be harnessed to create world-changing technologies, and want to contribute positively to making the life of the human race better, then you should consider Chemical Engineering.
Our BEng/MEng Chemical Engineering degrees deliver the learning outcomes required of any general chemical engineering degree programme giving our graduates the opportunity to find employment across the broad spectrum of Chemical Engineering employers. Our location in Aberdeen, the energy capital of Europe, and our engagement with local industry means that our students have the opportunity to engage with the local upstream oil and gas industry from the moment they embark on their studies. The University has embarked on a major programme of refurbishing and upgrading the facilities. This has seen the addition of a new dedicated chemical engineering teaching laboratory and the development of state-of-the-art computing & learning spaces within the School of Engineering.
Chemical engineering is concerned with manipulating the chemical, biochemical or physical state of substances in order to convert raw materials into products in a safe and cost-effective manner. For example, petrol, plastics and the synthetic fibres which make up much of our clothing are all derived from oil which is extracted from the ground as a mixture of oil, water and gas.
Ranked in the Ten best UK universities to study engineering (The Telegraph, 2018)
Course Details - Modules
The first two years cover general engineering, with elements of chemical, mechanical, petroleum and electrical/electronics, as well as civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year. This is also the point at which a final decision between MEng and BEng must be made. Successful BEng candidates will be offered the chance to change to the MEng.
Course Details – Assessment Method
Students are assessed by any combination of three assessment methods: Coursework such as essays and reports completed throughout the course; Practical assessments of the skills and competencies they learn on the course; Written examinations at the end of each course. The exact mix of these methods differs between subject areas, years of study and individual courses.
Honours projects are typically assessed on the basis of a written dissertation.
Course Details – Professional Bodies
Chemical Engineers, Institution of
How to Apply
26 January This is the deadline for applications to be completed and sent for this course. If the university or college still has places available you can apply after this date, but your application is not guaranteed to be considered.
Application Codes
Course code:
H813
Institution code:
A20
Campus Name:
Main Site
Campus code:
Points of Entry
The following entry points are available for this course:
Year 1
Year 2
Year 3
Entry Requirements for Advanced Entry (Year 2 and Beyond)
For entry to Year 2: Satisfactory completion of HNC Chemical Process Technology (120 SCQF credit points). A in all Graded Units. Curriculum to include: Engineering Maths 1, 2 and 3 (or equivalent), Physics Principles Mechanics (H93H 34).
For entry to Year 2: Satisfactory completion of HNC Engineering Systems (120 SCQF credit points). A in all Graded Units. Curriculum to include: Engineering Maths 1, 2 and 3 (or equivalent). Contact Selector to discuss exact unit requirements.
For entry to Year 2: Satisfactory completion of HNC Petroleum Engineering (120 SCQF credit points). A in all Graded Units. Curriculum to include: Engineering Maths 1, 2 and 3 (or equivalent), Fundamental Chemistry: An Introduction (DX2933), and Fundamental Concepts of Organic Chemistry (DP2P33).
For entry to Year 3: Satisfactory completion of HND Chemical Process Technology (240 SCQF credit points). BA in all Graded Units. Curriculum to include: Engineering Maths 1, 2, 3, 4 & 5 (or equivalent).
For entry to Year 3: Satisfactory completion of HND Engineering Systems (240 SCQF credit points). A in all Graded Units. Curriculum to include: Engineering Maths 1, 2, 3, 4 and 5 (or equivalent). Contact Selector to discuss exact unit requirements.
International applicants
Standard Qualification Requirements
Three A Levels at BBB with a B in Mathematics and B in Physics; or a B in Design & Technology; or a B in Engineering. A Level Chemistry is also required for entry.
GCSE English at a Grade C also required.
For entry to Year 2: Satisfactory completion of HNC Chemical Process Technology (120 SCQF credit points). A in all Graded Units.
Curriculum to include: Engineering Maths 1, 2 and 3 (or equivalent), Physics Principles Mechanics (H93H 34).
For entry to Year 2: Satisfactory completion of HNC Engineering Systems (120 SCQF credit points). A in all Graded Units. Curriculum to include: Engineering Maths 1, 2 and 3 (or equivalent). Contact Selector to discuss exact unit requirements.
For entry to Year 2: Satisfactory completion of HNC Petroleum Engineering (120 SCQF credit points). A in all Graded Units. Curriculum to include: Engineering Maths 1, 2 and 3 (or equivalent), Fundamental Chemistry: An Introduction (DX2933), and Fundamental Concepts of Organic Chemistry (DP2P33).
For entry to Year 3: Satisfactory completion of HND Chemical Process Technology (240 SCQF credit points). BA in all Graded Units.
Curriculum to include: Engineering Maths 1, 2, 3, 4 & 5 (or equivalent).
For entry to Year 3: Satisfactory completion of HND Engineering Systems (240 SCQF credit points). A in all Graded Units. Curriculum to include: Engineering Maths 1, 2, 3, 4 and 5 (or equivalent). Contact Selector to discuss exact unit requirements.
Four Highers at ABBB required in Mathematics and Physics/Engineering Science (previously known as Technological Studies). If applicant presents with H in Engineering Science instead of Physics, Mathematics must be A grade. SQA Higher Chemistry also required.
Also required: English at Standard Grade 1, 2 or 3 or National 5 at grades A, B or C.
32 Points including Mathematics and Physics at HL (5 or above) and English at Standard Level.
DDM in Mathematics and Physics required. GCSE at C or above in English or English Language, Mathematics and in either Chemistry or Physics or Dual Award Science.
A minimum of 5H with 3@ H2 and 2@ H3 (including Chemistry and H2 and H3 in Mathematics and Physics) OR AAABB including Chemistry, with Mathematics and Physics at AB. B grade must be at B2 or above.
Please note: For Chemical Engineering and Petroleum Engineering, an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to Year 1, in addition to the general engineering requirements.
Please click the following link to find out more about qualification requirements for this course
Minimum Further Information are not listed for this Course.
English language requirements
Test
Grade
AdditionalDetails
IELTS (Academic)
6.0
Listening - 5.5 or above; Reading - 5.5 or above; Speaking - 5.5 or above; Writing - 6.0 or above.
TOEFL (iBT)
78.0
TOEFL DI code is 0818: Listening - 17 or above; Reading - 18 or above; Speaking - 20 or above; Writing - 21 or above.
PTE Academic
59.0
Listening - 59 or above; Reading - 59 or above; Speaking - 59 or above; Writing - 59 or above.
Trinity ISE
Pass overall at ISE II with a distinction in writing and merit in the other three skills.
Institution's Own Test
Academic English Pre-sessional Programmes - Pass (valid for one year) OR Academic English Preparation Programme - Pass at Level Four (valid for one year)
To study for an undergraduate degree at the University of Aberdeen it is essential that you can speak, understand, read, and write academic English fluently. These skills will allow you to understand lectures, produce high standards of written work, and perform well in examinations.
We can assess your English language proficiency through a variety of means: through your nationality, through the qualifications you gained in high school, or through a recognised English language test. Please note certification must be within the two years prior to commencement of your degree programme, unless otherwise stated.
Please use the checklist at the following webpage to determine how you can meet our English language requirements:
